Article ID : 00197149 / Last Modified : 12/07/2018

How to hear TV audio from Sound Bar only.

TV audio comes out of both the TV speakers and Sound Bar.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

Follow these steps if the TV and Sound bar are connected with and HDMI® cable and audio comes out of the TV's built-in speakers and the Sound bar at the same time:

Each of these steps represents a possible solution to the issue. Check if the sound only comes out of the Sound bar after completing each procedure.

  1. On your Sound bar, make sure the Control for HDMI function is on.

    For HT-X9000F/XF9000/Z9F/ZF9

    1. Using the Sound Bar remote control, press the HOME button.
    2. Select Setup.
    3. Select Advanced Settings.
    4. Select HDMI Settings.
    5. Select Control for HDMI and then set to On.

    For HT-S100F/S200F/SF150/SF200/SF201

    1. Using the Sound Bar remote control, press and hold the VOICE button for 5 seconds.
      • The USB indicator flashes twice indicating the Control for HDMI function is on.
  2. Turn the Sound bar on and off.
    1. Using TV's remote control of the TV, turn the TV off. 
      • Check if the Sound bar turns off at the same time. 
    2. If the Sound bar doesn't turn off, use the Sound bar remote to turn the Sound bar off.
    3. Using the remote control of the TV, turn the TV on.
      • Check if the Sound bar turns on at the same time. 
    4. If the Sound bar doesn't turn on, use the Sound bar remote to turn off the Sound bar.
  3. Reset the Sound bar to the default settings.

    The method of reset differs depending on the model, so refer to the manual supplied with the product for details.

    NOTE: Following reset, if a subwoofer or rear speakers are connected to the Sound Bar wirelessly, their connection may be cut off. In this case, refer to the manual supplied with the product and perform wireless connection again.