For how to reset the Sound Bar, refer to the following:
NOTES:
- The reset method differs depending on the product. If your model is not listed below, refer to the manual.
- The settings return to their initial status. Settings such as volume, function, sound settings and/or personal information stored on the system may be change.
HT-RT3/RT40
- Hold down INPUT, touch VOL – and
on the unit simultaneously for 5 seconds. - “RESET” appears in the front panel display, and the settings of the menu and sound fields, etc. return to their initial status.
- Disconnect the AC power cord (mains lead).
- Reconnect the AC power cord (mains lead), then touch
to turn on the system.
HT-S100F
- Press and hold + (volume up) button,
(power) button, and
(input select) button on the unit for more than 5 seconds to reset the system. - Disconnect the AC power cord (mains lead), and then plug it back in.
HT-S200F/S350/X8500/X9000F/Z9F
- Press and hold the
(power)and - (volume down) button on the Sound Bar for more than 5 seconds. - Disconnect the AC power cord (mains lead), and then plug it back in.
HT-G700
- Press and hold the
(power)and - (volume down) button on the Sound Bar for more than 5 seconds. - Disconnect the AC power cord (mains lead), and then plug it back in.
HT-S20R
- Press the MENU button on the remote control.
- Select RESET by pressing the ↑ (upper) or ↓ (lower) button.
- When ALL RESET appears on the front panel display, press the ENTER button, and then the system settings returns to the factory default.