(Wired) Connection diagnosis results are displayed as OK, Failed, Failed

After performing a network diagnosis, the result may appear as:

1. Physical Connection: OK
2. Local Access: Failed
3. Internet Access: Failed

Follow the troubleshooting steps below. Each of these steps represents a possible solution to this issue, so please check the network connection status after completing each step.

1. Make sure the LAN cable is securely connected to the TV and to the router
   
2. Connect the LAN cable to a different LAN port on the router
3. Reset all of the network equipment, such as cable modem and router, by turning them off and un-plugging them for 2 minutes
4. Re-connect first the power cord of the modem
5. Re-connect the power cord of the router
6. After turning them on again, wait for a few minutes until they are done initialising, and confirm you can access the Internet on your other devices (such as a smartphone or computer)
7. Connect the TV power cord and turn on the power supply, and then perform the connection diagnosis again
8. Perform the connection diagnosis again

Is the problem solved?

No, take me to the next step

Back to Main Menu