Article ID : 00197934 / Last Modified : 29/06/2018

Notice about the specifications of HDMI connections with Blu-ray Disc Player.

Applicable Products and Categories of This Article

IMPORTANT: This article only applies to specific products.
Please check the Applicable Products at the bottom of this article.

Refer to the following questions and answers.

Video

Q1: What is the highest resolution that can be output from HDMI (HDMI1, HDMI2)?

A1: 4K 24P/60P from HDMI1 only.

 

Q2: How to output the optimum resolution.

A2: To output the optimum resolution, set Output Video Resolution to Auto on the Blu-ray Disc Player.

Follow the steps below:

  1. Press the HOME button on the remote.
  2. Select Setup.
  3. Select Output Video Resolution in the Screen Settings category.
  4. Select Auto.

 

Q3: Can HDMI (HDMI1, HDMI2) output to 2 unidentical TVs?

A3: Yes. It can be connected using HDMI cables either through an amp or directly to a TV. (The exception is 4K TVs, which only can be connected via HDMI1.)

 

Q4: Can both HDMI (HDMI1, HDMI2) output the same resolution?

A4: This depends on the specifications of your TV. Once you set the resolution output, the Blu-ray Disc Player will determine the highest common resolution that each TV can support.

 

Q5: When connecting to the TV via an amplifier, there is no picture on the TV screen.

A5: If the connected amp or TV is not compatible with 4K, there is no picture on the TV screen when Output Video Resolution in Screen Settings of the Blu-ray Disc Player is set to 4K.

In this case, try the following:

  • If the TV is not compatible with 4K:
    Set Output Video Resolution in Screen Settings to Auto.
  • If the amp is not compatible with 4K:
    Set Output Video Resolution in Screen Settings to Auto, or connect the Blu-ray Disc Player directly to the TV with an HDMI cable.

 

Audio

Q6: Will there be a difference in audio output format depending on whether the Blu-ray Disc Player is connected to the TV through an amplifier or without amplifier?

A6: This depends on your TV and without amplifier settings. The highest available format will be selected.

 

Q7: Does Hi-Res sound apply for HDMI audio? (except UBP-X700 and UBP-UX70)

A7: Yes, it supports Hi-Res sound.

 

Q8: What are the supported audio formats for HDMI Hi-Res audio? (except UBP-X700 and UBP-UX70)

A8: The following formats are compatible:

  • DSD (DSF and DFF)
  • FLAC
  • ALAC
  • AIFF  
  • WAV

 

Playback  

Q9: Why did resume playback take around 4-6s before the picture appeared?

A9: Because the transition process of output resolution takes time until the picture is normally output to the connected device.

 

Q10: Can I change output from the amplifier speakers to the TV speakers during playback?

A10: In the amplifier setting, choose TV output for audio, rather than the amplifier.

 

Q11: Can this Blu-ray Disc Player play a 4K UHD disc? (For UHP-H1)

A11: This Blu-ray Disc player currently does not support 4K UHD or 4K native video format.