• High-power high-end model: guide number 60^*1
• Includes LED light for stills and movies (1200 lx / 0.5 m maximum brightness, approx. 2 m illumination distance ^*2)
• ADI flash metering^*3
• Quick Navi interactive display facilitates fast, efficient operation
• Quick Shift Bounce mechanism
• Wireless multi flash ratio control
• High visibility dot matrix display
• Power level switching ^*4 (25 steps, 1/1 ~ 1/256, 1/3 increments)
• High-speed sync with wireless flash support
• Flash power compensation from the flash unit controls
• Dust and moisture resistant design^*5
• Supplied accessories: Flash bounce adaptor, LED light color filters, LED light internal diffuser, shoe adaptor (ADP-AMA), mini stand, carrying case, etc
• Wireless flash control capability when attached to α99 / α77 / α65 / α58 / α57 / α37 / α900 / α850 / NEX-7 / NEX-6 / DSC-RX1

*1

105 mm, ISO 100·m

*2

At ISO 3200, F5.6

*3

Dependent on camera body and lens specifications

*4

High-speed sync functions up to 1/128

*5

The design resists the intrusion of dust and moisture, but is not 100% dust and moisture proof

• * Can be used with Auto-lock Accessory Shoe equipped cameras via the supplied shoe adaptor

• High output: guide number 43^*1
• Sony original Quick Shift Bounce
• Dust and moisture resistant design^*2
• Built-in wide panel covers up to 15 mm^*3 focal length and catch light reflector
• ADI flash metering^*4
• High-speed sync aids in creating defocused backgrounds
• Wireless multi flash ratio control
• Automatic white balance adjustment
• Automatic flash coverage adjustment matches camera's sensor size
• Supplied accessories: case and mini stand
• Wireless flash control capability when attached to α99 / α77 / α65 / α58 / α57 / α37 / α900 / α850 / NEX-7 / NEX-6 / DSC-RX1

*1

105 mm, ISO 100·m

*2

The design resists the intrusion of dust and moisture, but is not 100% dust and moisture proof

*3

35 mm full-frame format equivalent focal length on an APS-C format camera

*4

Dependent on camera body and lens specifications

• * An optional Shoe Adaptor (ADP-MAA) is required for use with cameras that are equipped with a Multi Interface Shoe

• Guide number 20*
• Powerful enough to illuminate subjects up to 5 meters away (TELE position, ISO 100, F4)
• Compact and slim – only 24 mm thick
• Original mechanism allows one-touch 75° upward tilt for convenient bounce
• Automatic white balance adjustment
• Wireless flash control capability when attached to α99 / α77 / α65 / α58 / α57 / α37 / α900 / α850 / NEX-7 / NEX-6 / DSC-RX1
• Carrying pouch supplied

• * 50 mm, ISO 100·m
• * Shoe adaptor (ADP-AMA) required for use with Auto-lock Accessory Shoe cameras

Bounce flash

The flash light is diffused by being bounced off the ceiling, resulting in natural lighting with soft shadows. The flash position can be easily adjusted via a slide switch.

Direct flash (for outdoor use)

Provides greater reach than the camera's built-in flash, for effective lighting in dimly-lit outdoor situations.

• Guide number 20^*1
• Power supplied from camera body
• Higher output than the camera's built-in flash illuminates subjects as far as 5 meters away^*2
• 75° click stop for bounce flash
• Supplied accessories: wide panel (supports VCL-ECU1 Ultra Wide Converter), carrying pouch

*1

50 mm, ISO 100·m

*2

At TELE position, ISO 100, F4

• * VCL-ECF1 Fisheye Converter not supported (some light falloff will occur)
• * When used with the SEL1018, detach lens hood

Kit includes 2 powerful flash units (guide number 24^*1, combined) that can be mounted at various positions around the lens holder. Flash units can also be attached on arms that extend to two positions. A modeling function that lets you check beforehand how shadows will fall, and a wide angle adapter that expands flash coverage to the angle of view of a lens at 24 mm focal length^*2.

*1

ISO 100 · m

*2

35 mm full-frame format equivalent focal length on an APS-C format camera

• * An optional ADP-MAA Shoe Adaptor is required for use with cameras that are equipped with a Multi Interface Shoe
• * Filter mount diameter: 49 mm, 55 mm

• With flash units mounted 180° apart
• With flash arm attached and extended

66 white LEDs are four times brighter than previous models^*1 (approx. 700 lx / 0.3m). The entire ring can be lit for shadow-free shooting, or just the left or right side can be lit when more depth and sculpting is required. A dimmer control provides continuous variation from approx. 10% to 100% output, for precise lighting control.

*1

Compared to the HVL-RLAM Ring Light

• * Accessory Shoe allows attachment to cameras equipped with a Multi Interface Shoe
• * Filter mount diameter: 49 mm, 55 mm

• 
• Brightness can be adjusted from 10% to 100%

Battery Video IR Light
HVL-LEIR1

The HVL-LEIR1 is a remarkably compact LED video light that is capable of delivering up to 1500 lux at 0.5 meters. It's small enough to be used comfortably with compact camcorders or Sony E-mount cameras, and will take up so little room in your bag that it's easy to take anywhere. In addition to normal white light output, this model also includes IR illumination that works with cameras that include NightShot capability. Power is supplied by two alkaline or NiMH AA batteries. Features a Multi Interface Shoe for compatibility with a wide range of Sony Digital Imaging products.

• * An ADP-AMA Shoe Adaptor is required for use with cameras that are equipped with an Auto-lock Accessory Shoe
• * IR Light only functions with cameras that include the NightShot feature

Main specifications