Article ID : 00074030 / Last Modified : 12/07/2018

How to set up and use the Wi-Fi Direct feature of the 2013 and 2014 TV models

Applicable Products and Categories of This Article

To set up and use the Wi-Fi Direct feature, follow the steps below.

  1. Enable the Built-in Wi-Fi setting on your TV.

    1. On the supplied remote control, press the HOME button.
    2. Select Settings.
      NOTE: The image below is an example of the 2014 TV model. 

      Image

    3. Select System Settings or Network.

      NOTE: If the TV shows Network, skip to step 6.

    4. Select Setup.
    5. Select Wi-Fi Setup.
    6. Select Built-in Wi-Fi or Built-in Wireless LAN.

      Image

    7. Select ON.
       
  2. Turn on the Wi-Fi Direct setting of the TV.

    1. On the supplied remote control, press the HOME button.
    2. Select Settings.
    3. Select System Settings or Network.

      NOTE: If the TV shows Network, skip to step 6.

    4. Select Setup.
    5. Select Wi-Fi Setup.
    6. Select Wi-Fi Direct.

      Image

    7. Select ON.
       
  3. Display the WPA key of the TV.

    1. On the supplied remote control, press the HOME button.
    2. Select Settings.
    3. Select System Settings or Network.

      NOTE: If the TV shows Network, skip to step 6.

    4. Select Setup.
    5. Select Wi-Fi Setup.
    6. Select Wi-Fi Direct Settings.

      Image

    7. Press the Options button.

      Image

    8. Select Manual.

      Image

    9. Select Other Method.

      Image

      NOTE: The SSID and the WPA key will be displayed on the TV screen.

      Image

    10. On the Wi-Fi setting of the Wi-Fi Direct device, select the SSID of the TV and enter the WPA key displayed on the TV screen as the password.

    NOTE: