Download update file

• Save the file D72_V152.zip (4.78 MB (5,018,129 bytes)) to your desktop.

Unzip the downloaded file

When your computer is running Windows Vista®

1. Right-click the downloaded zip file D72_V152.zip.
   
2. Click Extract All.
   
3. Click Extract in the "Extract Compressed (Zipped) Folders" window that has opened. The D72_V152 folder is now open on your computer's desktop.
   

When your computer is running Windows® XP

1. Right-click the downloaded zip file D72_V152.zip.
   
2. Click Extract All.
   
3. Click Next in the "Welcome to the Compressed (zipped) Folders Extraction Wizard".
   
4. Click Next.
   
5. Click Finish. The D72_V152 folder is now open on your computer's desktop.
   

When your computer is running Windows® 2000

1. Use a decompression tool to unzip the saved file D72_V152.zip to your desktop. After you have unzipped the file, the D72_V152 folder will be created on your desktop.
   

When your computer is running Mac OS

1. Double-click the saved file D72_V152.zip. The D72_V152 folder is created on your desktop.
   

The extracted D72_V152 folder contains the following update files.

• DFD72V02.VUP
  * Depending on your operating environment, some file extensions (*.VUP or *.vup) may not be displayed.

Note

• Depending on your operating system, the file may be automatically unzipped when it is downloaded. You may also not be able to unzip the file using the procedures described above, depending on the operating system that you are using. In latter case, please use a decompression tool.
  

Prepare the storage media

This section describes how to update using a Memory Stick/Memory Stick Duo.

If you are using an SD memory card, CompactFlash card, or xD-Picture Card, please replace Memory Stick/Memory Stick Duo with your using memory card in the following explanations .

Prepare an initialized (formatted) Memory Stick/Memory Stick Duo. For details about how to initialize (format) it, please see the Operating Instructions of your digital camera.

Note

• Please use a Memory Stick/Memory Stick Duo that has been initialized (formatted) by your digital camera, or initialized (formatted) by the dedicated Memory Stick formatting software "Memory Stick Formatter".
  
• Please use an SD memory card, CompactFlash card or xD-Picture Card that has been initialized (formatted) by your digital camera.
  
• We do not recommend initializing (formatting) with a computer, as the DPF-D72 may not recognize the storage media, depending on the type of initialization format.
  If you have no choice but to use a storage media that has been initialized with a computer, copy a JPEG image file and check to see if it is displayed correctly on the DPF-D72.
  
• The firmware update may fail if the Memory Stick/Memory Stick Duo contains other files as well as the update file. You should therefore always use a Memory Stick/Memory Stick Duo that has just been initialized (formatted).
  

Copy the update file to the storage media

Copy the update file to the Memory Stick/Memory Stick Duo using either of the following methods.

If your computer is equipped with a Memory Stick slot

1. Insert the initialized (formatted) Memory Stick/Memory Stick Duo into the Memory Stick slot on your computer.
   
2. Open the D72_V152 folder on your desktop, and copy the update file inside it to the Memory Stick/Memory Stick Duo.
   
3. Without creating a folder, drag and drop the update file to the root directory of the Memory Stick/Memory Stick Duo.
    
   * The screen display may vary depending on your operating environment.
   

If your computer has no Memory Stick slot.

1. Insert the initialized (formatted) Memory Stick/Memory Stick Duo into the Memory Stick slot on your digital camera.
   
2. Connect your digital camera to your computer using a USB cable.
   
3. Open the D72_V152 folder on your desktop, and copy the update file inside it to the Memory Stick/Memory Stick Duo that you have inserted into your digital camera.
   
4. Without creating a folder, drag and drop the update file to the root directory of the Memory Stick/Memory Stick Duo.
    
   * The screen display may vary depending on your operating environment.
   

Note

• Refer to the Operating Instructions of your digital camera for more details about how to connect a digital camera to a computer, and how to copy to a Memory Stick/Memory Stick Duo.
  

Update the firmware

Note:

1. Check that the Digital Photo Frame is turned off (the (power) button is red).
   
2. Insert the Memory Stick/Memory Stick Duo containing the copied update file into the Memory Stick slot on the Digital Photo Frame.
   
3. Turn on the Digital Photo Frame by pressing the (power) button while pressing and holding down the VIEW MODE button.
   Keep the VIEW MODE button pressed until the following message is displayed on the LCD screen.
   
   Note If the above display does not appear on the LCD screen after a few minutes or if the display is distorted, remove the AC adaptor from the Digital Photo Frame and reconnect it. Next, make sure that the (power) button is green, press the (power) button to power off. Check that the (power) button is red, and start the update process again from "Update the firmware".
   Please consult your local Sony Customer Service Center if the above display still does not appear on the LCD screen.
   
4. Press the (ENTER) button. After approximately 1 minute, please check that the following message is displayed on the LCD screen.
   Note
   If the above display does not appear on the LCD screen after a few minutes or if the display is distorted, disconnect the AC adaptor from the Digital Photo Frame and reconnect it. Next, make sure that the (power) button is green, press the (power) button to power off. Check that the (power) button is red, and start the update process again from "Update the firmware".
   Please consult your local SONY customer service center if the above display still does not appear on the LCD screen.
   
5. Press the (ENTER) button. The LCD screen changes to the following display and the program for the firmware update is performed. It takes about 1 minute 20 seconds to write the firmware.
   
   
   

   Troubleshooting Tip

   1. If the "No update file found." error message is displayed
      Cause: The file is not in the Memory Stick/Memory Stick Duo.
      Action: Check that the correct files have been copied to the correct location on the Memory Stick/Memory Stick Duo, and redo the procedures in "Update the firmware" from the beginning.
      
   2. If the "Update failed. See Explanations on program update." error message is displayed
      Cause: The Memory Stick/Memory Stick Duo has fallen out during the update.
      Action: Click "Explanations on program update" below and read its recommendations.
      
      
6. When the completed message appears on the LCD, press the (power) button to turn off the power of the Digital Photo Frame.
   

    

7. Remove the Memory Stick/Memory Stick Duo from the Digital Photo Frame.
   

Check the version of the updated firmware

1. Turn on the Digital Photo Frame by pressing the (Power) button.
   
2. Press the MENU button.
   
3. Select Settings tab using the direction buttons.
   
4. Select System Information using the direction buttons, and press the (ENTER) button.
   
5. Check the firmware version is displayed as 1.52.x.xx.
   
   
6. Press the (ENTER) button after you have checked the firmware version.
   
7. Press the MENU button.
   
8. Turn off the Digital Photo Frame.
   
9. This completes the updating of the firmware.
   The update file in the Memory Stick/Memory Stick Duo is not required after the update. The update file can be deleted.
   

Note

• If any images saved in the internal memory have been lost or damaged during the firmware update, save them to the internal memory again using the procedures described in "Restoring image data to the internal memory". Please click here to refer to the FAQ.

Explanations on program update 

If the error "Update failed. See [Explanations on program update]." occurs during update of the Digital Photo Frame firmware, please carry out the following procedures.

Turn off the power of the Digital Photo Frame and redo the procedures in "Update the firmware" from the beginning.

If problems are not resolved by performing the procedures above,

• Repeat the procedures above multiple times.
• Initialize (format) the memory card you are using, re-copy the update file to the memory card, and attempt the procedures above again.
• Try another memory card if one is available.
• If the problem is still not resolved, consult your local Sony Customer Service Center.

» Proceed to download the file