| 1. To download the installation for VGN-Z2 series |
24 Oct 2008 |
N/A |
N/A |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
Please download the installation manual for VGN-Z2 series and refer to the installation steps to install the related XP drivers and applications on VGN-Z2 Series.
Note: Please use Adobe Reader to open the manual that is in PDF format.
»
Proceed to download the file
|
| 2. To install SATA driver (Optional) |
24 Oct 2008 |
N/A |
0.10 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
If the supplied XP installation disc is used to change the current Operating System to Windows XP Pro(This disc is only bundled with preinstalled Windows Vista Business models.), this driver need not be installed. Otherwise, proceed as below:
1. Find one external floppy disk drive and connect with the unit.
2. Insert a blank formatted floppy disk into the external floppy disk drive, and unzip the downloaded zip file.
3. Copy these 6 unzip files to the blank formatted floppy disk.
4. Start the Microsoft® Windows® Operating System setup by booting from the installation CD.
5. At the beginning of the Operating System setup, press theF6 key to install a third-party SAST or RAID driver.
6. When prompted, insert the floppy disk with the SATA driver files.
7. After reading the floppy disk, the SATA Controller will be presented. Select this driver to install (Please click PgUP button to choose Intel ICH9M-E/M SATA AHCI Controller option). Finish the Windows® Operating System installation and install all necessary drivers. »
Proceed to download the file
|
| 3. To install Chipset Software Installation Utility |
24 Oct 2008 |
N/A |
2.71 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Chipset.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Chipset.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 4. To install Intel Graphics Driver (make sure the switch of video card is at “STAMINA”) |
24 Oct 2008 |
N/A |
19.99 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Graphics-Intel.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Graphics-Intel.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 5. To install NVIDIA Graphics Driver(make sure the switch of video card is at “SPEED”) |
24 Oct 2008 |
N/A |
50.77 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Graphics-NVIDIA.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Graphics-NVIDIA.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 6. To install KB835221 (Optional) |
24 Oct 2008 |
N/A |
0.60 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
If the supplied XP installation disc is used to change the current Operating System to Windows XP Pro(This disc is only bundled with preinstalled Windows Vista Business models.), this driver need not be installed. Otherwise, proceed as below:
1. Download the KB835221.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the KB835221.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 7. To install Audio driver |
24 Oct 2008 |
N/A |
22.84 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Audio.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Audio.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 8. To install Modem driver |
24 Oct 2008 |
N/A |
2.61 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Modem.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Modem.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 9. To install Alps Pointing device for VAIO |
24 Oct 2008 |
N/A |
1.71 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Pointing.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Pointing.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 10. To install Intel Network driver |
24 Oct 2008 |
N/A |
1.43 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the LAN-Intel.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the LAN-Intel.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 11. To install MARVELL Network driver (Optional) |
24 Oct 2008 |
N/A |
1.34 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
Ensure the computer is connected to the docking station before installing this driver. Otherwise, please skip this driver.
1. Download the LAN-Marvell-Docking.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the LAN-Marvell-Docking.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 12. To install Memory Stick driver |
24 Oct 2008 |
N/A |
1.05 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the MS.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the MS.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 13. To install Memory Stick Icon |
24 Oct 2008 |
N/A |
0.50 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the MSIcon.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the MSIcon.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 14. To install SD Driver |
24 Oct 2008 |
N/A |
1.04 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the SD.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the SD.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 15. To install Sony NC Device |
24 Oct 2008 |
N/A |
1.08 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the SonyNC.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the SonyNC.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 16. To install Sony PI Device |
24 Oct 2008 |
N/A |
1.09 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the SonyPI.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the SonyPI.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 17. To install TPM Driver |
24 Oct 2008 |
N/A |
1.03 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the TPM.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the TPM.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 18. To install Bluetooth Driver |
24 Oct 2008 |
N/A |
123.03 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Bluetooth.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Bluetooth.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 19. To install Camera Driver |
24 Oct 2008 |
N/A |
1.17 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Camera.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Camera.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 20. To install Fingerprint driver |
24 Oct 2008 |
N/A |
1.04 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the FingerPrint.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the FingerPrint.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 21. To install Intel Wireless LAN driver |
24 Oct 2008 |
N/A |
32.62 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Wireless-Intel.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Wireless-Intel.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 22. To install Sony Shared Library |
24 Oct 2008 |
N/A |
2.14 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Sony_Shared_Library.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Sony_Shared_Library.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 23. To install Sony Utilities DLL |
24 Oct 2008 |
N/A |
2.41 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Sony_Utilities_DLL.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Sony_Utilities_DLL.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 24. To install Setting Utility Series |
24 Oct 2008 |
N/A |
11.62 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Setting_Utility_Series.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Setting_Utility_Series.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 25. To install VAIO Event Service |
24 Oct 2008 |
N/A |
4.34 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the VAIO_Event_Service.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the VAIO_Event_Service.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 26. To install VAIO Control Center |
24 Oct 2008 |
N/A |
3.29 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the VAIO_Control_Center.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the VAIO_Control_Center.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 27. To install Battery Checker |
24 Oct 2008 |
N/A |
3.29 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Battery-Checker.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Battery-Checker.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 28. To install FrameWork 1.1 (Optional) |
24 Oct 2008 |
N/A |
35.04 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
If the supplied XP installation disc is used to change the current Operating System to Windows XP Pro(This disc is only bundled with preinstalled Windows Vista Business models.), this driver need not be installed. Otherwise, proceed as below:
1. Download the FrameWork 1.ZIP file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and unzip the FrameWork 1.ZIP file to begin the installation.
3. Please double-click the SETUP.EXE file which you unzipped.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 29. To install FrameWork 2.0 (Optional) |
24 Oct 2008 |
N/A |
24.04 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
If the supplied XP installation disc is used to change the current Operating System to Windows XP Pro(This disc is only bundled with preinstalled Windows Vista Business models.), this driver need not be installed. Otherwise, proceed as below:
1. Download the FrameWork 2.ZIP file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and unzip the FrameWork2.ZIPfile to begin the installation.
3. Please double-click the dotnetfx .EXE file which you unzipped.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 30. To install Battery Care |
24 Oct 2008 |
N/A |
6.17 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Battery_Care.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Battery_Care.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 31. To install VAIO Power Management |
24 Oct 2008 |
N/A |
9.57 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the VAIO_Power_Management.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the VAIO_Power_Management.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 32. To install Suite QL |
24 Oct 2008 |
N/A |
N/A |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the SuiteQL-AP.exe file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the SuiteQL-AP.exe file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 33. To install Intel Matrix Storage Manager |
24 Oct 2008 |
N/A |
22.15 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Intel_Matrix_Storage_Manager.exe file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Intel_Matrix_Storage_Manager.exe file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 34. To install VAIO Update |
24 Oct 2008 |
N/A |
3.00 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the VAIO_Update.exe file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the VAIO_Update.exe file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 35. To install Wireless Switch Setting Utility |
24 Oct 2008 |
N/A |
6.03 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the Wireless_Switch_Setting_Utility.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the Wireless_Switch_Setting_Utility.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|
| 36. To install TPM Utility |
24 Oct 2008 |
N/A |
39.96 MB |
|
Applicable Models
VGN-Z26GN, VGN-Z26MN, VGN-Z26SN, VGN-Z27GN
1. Download the TPM-Utility.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the TPM-Utility.EXE file to begin the installation.
3. Follow the installation wizard that appears.
4. At the License Agreement dialog, read the agreement. Click I Agree to continue with the installation.
NOTE: Several setup boxes may briefly appear during the installation. Follow the installation wizard that appears.
5. When the installation finishes, please restart the computer if needed. »
Proceed to download the file
|