SLT & DSLR Camera (A-mount)

Note:

• Please download the firmware update file from the SONY Website of the country where you purchased the camera.
  
  

• NOTE: This download is meant only for DSLR-A700 camera purchased in Asia Pacific region

  Applicable Download

  File name: DSCA700v03.exe

  File size: 4.53 MB

  ---

Download and extraction procedures

1. Double-click the downloaded file DSCA700v03.exe to extract it.
   * Depending on your Operating System, the file may be automatically extracted when downloading.
   
   
2. After extraction, the following file is created.
     - DSCA700.app [ File size : 4,712,024 bytes ]
    * The extensions may not be displayed depending on the computer.

Prepare the recording medium

Prepare the recording medium (Memory Stick Duo / CF card / Microdrive) to use for the update, then format it with the camera.

Note:

• If the recording medium is not formatted, the firmware update may not start.
  
  
• Please note that all data including even protected images will be erased by formatting and cannot be restored. 
  

Copy the update files to the recording medium

Copy the update files to the recording medium (Memory Stick Duo / CF card / Microdrive) with one of the procedures below depending on your environment.

If your computer has a card slot which is suitable for the recording medium

1. Insert the recording medium formatted with the camera in the card slot of your computer.
   
   
   
2. Copy the update files DSCA700.app to the root folder of the recording medium.
   

If your computer does not have a card slot which is suitable for the recording medium

1. Insert a formatted recording medium in the camera.
   
   
   
2. Insert a fully charged battery (NP-FM500H) in the camera, or connect the AC Adaptor to the camera.
   
   
   
3. Slide the POWER switch to the On position.
   
   
   
4. Press the MENU button and select the Setup menu-2 with the Multi-selector.
   
   
5. Please check that Mass Storage was chosen in USB connection of Setup menu. If it was not chosen, please set to Mass Storage.

   How to set the USB connection

   1. Select the USB connection with the Multi-selector.

   2. Press the Center button of the Multi-selector to display the options of USB connection.

   3. Select the "Mass Storage" with the Multi-selector then press the Center button of the Multi-selector.

   
   
6. Press the MENU button to turn off the menu.
   
   
7. Connect the camera and the computer with the USB cable.
   
   
8. Copy the update file DSCA700.app to the root folder of the recording medium inserted in the camera.
   
   
9. When copying is finished, disconnect the USB cable.

Update the firmware

Note:  

• When performing the firmware update, use fully charged rechargeable battery pack NP-FM500H or the AC adapter AC-VQ900AM AC adapter/charger (sold separately).
  
  
• Do not remove the battery or AC adapter during the firmware update, otherwise the camera may be permanently damaged.
  

1. Slide the POWER switch to ON position and set the "Memory card" to the proper type you use for update (Memory Stick Duo / CF card / Microdrive) in the Setup menu-2 then slide the POWER switch to OFF position.
   
2. Insert the prepared recording medium (Memory Stick Duo / CF card / Microdrive) in the camera, then slide the POWER switch to ON position while MENU button is pressed.
   
3. The confirmation window appears.
   
   
4. Use the Multi-selector to highlight OK, then press the Center button of Multi-selector.
   
5. Updating procedure starts.
   
   
6. When the “Update is completed.” message appears, the camera automatically restarts after approximately 5 sec.
   
   
7. Turn the camera off, then remove the recording medium.
   

Check the version after updating

1. Slide the POWER switch to ON position.
   
   
2. Press the MENU button, then LCD monitor displays menu.
   
   
3. Press the DISP (Display) button while menu is indicated. A window will show the firmware version.
   
   
4. Check the version number has changed to "Ver.3 ".
   
   
5. Press the Center button of Multi-selector to close the version number display.
   

Note:

• If updating procedure was not completed successfully or the camera cannot turn on, please consult your local authorized Sony service facility.
  
  
  
• After updating the camera, format the recording medium or delete the update file DSCA700.app from the recording medium.