Print Page
Back

Downloads

Home  ›  Support  ›  Downloads  ›  DSLR-A100

Digital SLR Camera - DSLR-A100

Summary
DSLR-A100 Firmware Update Version 1.04
DSLR-A100K, DSLR-A100, DSLR-A100W

This program updates the camera firmware to version 1.04. With this update, the camera will support the lens information (focal length) display of the Zoom Lens DT 55-200mm F4-5.6.

The process for upgrading the firmware is to download the compressed firmware file to your computer and then copy it over to a recording medium. The recording medium is then inserted into your camera and a series of steps are taken on the camera to complete the installation.

Determine whether or not this firmware update is needed :

IMPORTANT:

  • This firmware update is only for a DSLR-A100 camera that has Version 1.00, 1.01, 1.02 and 1.03 of the firmware installed.
  • If the firmware is already version 1.04, it is not necessary to update the firmware.

Only DSLR-A100 cameras that meet the criteria for the current firmware version should proceed with this firmware update. Follow these steps to check your firmware version.

  1. Slide the POWER switch to the On position. 
  2. Press the MENU button, then the LCD monitor displays the menu. 
  3. Press the  (Display) button.
  4. A window will show the firmware version on the LCD monitor.
  5. Press the Center button of the controller to close the version number display.

IMPORTANT NOTES: PLEASE READ CAREFULLY.

WARNING:

  1. Do not use this firmware to update any other models of digital cameras.
  2. This Camera firmware update and any changes incurred by it are permanent. It is not possible to return to a previous firmware version after updating this firmware. By continuing this update process, downloading and updating this firmware, acknowledgement of awareness and understanding that this update cannot reverse this installation.

Note:

  • It is highly recommended to print out these instructions as a reference during the installation process.
  • Please contact your local Sony office, if you encounter any problem while performing the firmware update

Available Download

For Asia Pacific Region (Excluding Australia and New Zealand)

  • Windows Operating System: DSCA100V104A.exe (643 KB)
  • Macintosh Operating System: DSCA100V104A.zip (611 KB)

For Australia and New Zealand

  • Windows Operating System: DSCA100V104U.exe (637 KB)
  • Macintosh Operating System: DSCA100V104U.zip (605 KB)

Originally posted: 2007/10/19

  
Go to a specific model support page.