AITi-200/P - AIT-2 Turbo Internal SCSI Drive
AITi-200-A/P - AIT-2 Turbo Internal IDE Drive
AITi-200-ST/P - AIT-2 Turbo Internal SATA Drive
AITe-200/P - AIT-2 Turbo External SCSI Drive

• AIT-2 Turbo tape drives provide performance and capacity approaching that of LTO-1 at a price point similar to DAT72.
• Available with SCSI, ATAPI, SATA interfaces
• Capacity: 80GB native, 208GB* compressed
• Transfer Rate: - 12MB/s, 43.2GB/hr native ; 31.2MB/s*, 112.32GB/hr* compressed
• AME Binder free AIT media, that means less head clogging, less cleaning, higher reliability
• High reliability with MTBF of 300,000 POH (100% duty cycle), head life of 50,000 hours, and media uses of 30,000 end-to-end passes
• Super Head Cleaner mechanism helps reduce the need for periodic cleaning
• Efficient data management with Memory In Cassette (MIC)
• Dust protective bezel - more reliable tape drive that works well even in dusty office environments.
• Compact 3.5-inch form factor for easy integration into existing systems
• 3-years warranty

*Assumes 2.6:1 compression. Data compression performance varies according to the type of data.
Actual compression performance is generally lower if the data is already pre-compressed.

AIT-2 Turbo
Model number	AITi-200/P	AITi-200-A/P	AITi-200-ST	AITe-200/P	AITe-200-UL
Type	3.5/5.25-inch internal type with dust cover	3.5/5.25-inch internal type with dust cover	3.5/5.25-inch internal type with dust cover	External type with dust cover	External type with dust cover
Format	AIT-2 Turbo
Media	AIT-2 Turbo 80 GB data cartridge, AIT-2 50 GB/36 GB data cartridge
	AIT-1 Turbo 40 GB data cartridge, AIT-1 35 GB/25 GB data cartridge
	AIT-E Turbo 20 GB data cartridge
Capacity	208 GB*/80 GB (with AIT-2 Turbo 80 GB data cartridge)
Sustained transfer rate	12 MB/s
Buffer Memory	32MB	24MB	24MB	32MB	24MB
Burst transfer rate	160 MB/s	100 MB/s	150 MB/s	160 MB/s	USB 2.0 = 480Mbit/s IEEE1394 = 400Mbit/s
Interface	Ultra160 SCSI LVD/SE	ATA/ATAPI-6 Ultra DMA mode5 (Ultra ATA/100)	Serial ATA (Gen.1)	Ultra 160 SCSI LVD/SE	USB 2.0 / IEEE 1394(iLink S400)
Interface configuration	68-pins high density connector	40-pins connector	7-pins connector	68-pins high density connector	USB 2.0 = Normal Type B IEEE 1394 = 6Pin
Error rate	Less than 10-17
MTBF(duty 100%)	300,000 POH
Dimensions (excluding protrusions)	3.5-inch internal type : 101.6 (W) x 41.2 (H) x 155 (D) mm			198 (W) x 64.5 (H) x 246 (D) mm
	5.25-inch internal type : 146 (W) x 41.2 (H) x 155 (D) mm
Weight	3.5" : 780 g / 5.25" -1050 g			2.4 kg
Power requirements	DC5 V-/+5%, DC12 V-/+10%			AC100-240 V -/+10%, 50/60 Hz
Power consumption	14 W (Average)	12 W (Average)	12 W (Average)	20W (Average)
Operating Environment Temperature	5 degrees Celcius to 40 degrees Celcius			10 degrees Celcius to 35 degrees Celcius
Operating Humidity	20 to 80% (26 degrees Celcius)			30 to 80% (26 degrees Celcius)
Kit Model Information	AIT Drive unit, Cable, Terminator(For SCSI Model), Quick Start Guide, CD-ROM(Device Driver, Operation Instruction), Data Media (1pc), Cleaning Media (1pc)			AIT Drive unit, SCSI Cable, Terminator, Quick Start Guide, CD-ROM(Device Driver, Operation Instruction), Data Media (1pc)	AIT Drive unit, IEEE1394 (6P-6P),IEEE1394(6P-4P), Quick Start Guide, CD-ROM(Device Driver, Operation Instruction), Data Media (1pc)
*Assumes 2.6:1 compression. Data compression performance varies according to the type of data.
Actual compression performance is generally lower if the data is already pre-compressed.