AITi-100/P - AIT-1 Turbo Internal SCSI Drive
AITi-100-A/P - AIT-1 Turbo Internal IDE Drive
AITi-100-ST/P - AIT-1 Turbo Internal SATA Drive
AITe-100/P - AIT-1 Turbo External SCSI Drive

• Turbo charge your tape backups with Sony AIT. New improvements for Sony AIT-1 tape drives boosts performance 50% and capacity 10%. Compact 8mm tape format is an ideal upgrade from 4mm. Lower cost and 2X the performance, plus more capacity, when compared to DAT72
• Available with SCSI, ATAPI, SATA interfaces
• Capacity: 40GB native, 104GB* compressed
• Transfer Rate: - 6MB/s, 21.6GB/hr native ; 15.6MB/s*, 56.2GB/hr* compressed
• AME Binder free AIT media, that means less head clogging, less cleaning, higher reliability
• AIT-1 Turbo drive is backwards read/write compatible with AIT-1 Turbo and AIT-1 media
• High reliability with MTBF of 300.000 POH at 100% duty cycle. AIT-E is 7.5 times more reliable than DDS-3 same drive size as DAT drives making it easy to replace DAT in existing servers
• Tape slot dust cover reduces environmental contaminants
• Super Head Cleaner mechanism helps reduce the need for periodic cleaning
• 3-years warranty

*Assumes 2.6:1 compression. Data compression performance varies according to the type of data.
Actual compression performance is generally lower if the data is already pre-compressed.

AIT 1 Turbo
Model number	AITi-100/P	AITi-100-A/P	AITi-100-ST	AITe-100/P	AITe-100-UL
Type	3.5/5.25-inch internal type with dust cover	3.5/5.25-inch internal type with dust cover	3.5/5.25-inch internal type with dust cover	External type with dust cover	External type with dust cover
Format	AIT-1 Turbo
Media	AIT-E Turbo 20 GB data cartridge
	AIT-1 Turbo 40 GB data cartridge
	AIT-1 35 GB/25 GB data cartridge
Capacity	104 GB*/40 GB (with AIT-1 Turbo 40 GB data cartridge)
Sustained transfer rate	6 MB/s
Buffer Memory	12 MB
Burst transfer rate	40 MB/s	100 MB/s	150 MB/s	40 MB/s	USB 2.0 = 480Mbit/s IEEE1394 = 400Mbit/s
Interface	Ultra Wide SCSI LVD/SE	ATA/ATAPI-6 Ultra DMA mode5 (Ultra ATA/100)	Serial ATA (Gen.1)	Ultra Wide SCSI LVD/SE	USB 2.0 / IEEE 1394
Interface configuration	68-pins high density connector	40-pins connector	7-pins connector	68-pins high density connector	USB 2.0 = Normal Type B IEEE 1394 = 6Pin
Error rate	Less than 10-17
MTBF(duty 100%)	300,000 POH
Dimensions (excluding protrusions)	3.5-inch internal type : 101.6 (W) x 41.2 (H) x 155 (D) mm			198 (W) x 64.5 (H) x 246 (D) mm
	5.25-inch internal type : 146 (W) x 41.2 (H) x 155 (D) mm
Weight	3.5" - 740 g / 5.25" - 970 g			2.4 kg
Power requirements	DC5 V-/+5%, DC12 V-/+10%			AC100-240 V -/+10%, 50/60 Hz
Power consumption	10 W	7 W	8 W	20W (Average)
Operating Environment Temperature	5 degrees Celcius to 40 degrees Celcius			10 degrees Celcius to 35 degrees Celcius
Operating Humidity	20 to 80% (26 degrees Celcius)			30 to 80% (26 degrees Celcius)
Kit Model Information	AIT Drive unit, Cable, Terminator(For SCSI Model), Quick Start Guide, CD-ROM(Device Driver, Operation Instruction), Data Media (1pc), Cleaning Media (1pc)			AIT Drive unit, SCSI Cable, Terminator, Quick Start Guide, CD-ROM(Device Driver, Operation Instruction), Data Media (1pc)	AIT Drive unit, IEEE1394 (6P-6P),IEEE1394(6P-4P), Quick Start Guide, CD-ROM(Device Driver, Operation Instruction), Data Media (1pc)
*Assumes 2.6:1 compression. Data compression performance varies according to the type of data.
Actual compression performance is generally lower if the data is already pre-compressed.