LIB-D81 Series - (A2T/A3/A3Ex/A4/A5)

• 8 slots 1U Rackmount Tape Library with up to 8320GB compressed capacity in a compact, stylish design. (compression ratio 1:2.6)
• Ideal entry level automated back-up for departments, workgroups, and small to medium sized businesses
• Achieve one week or more of unattended backup in convenient space saving desktop design
• Front panel provides clear information for ease of use
• Increased data media security with locking front door
• Investment protection through full backwards read/write compatibility across three AIT performance and capacity configurations
• Supported by major ISV's and Operating Systems
• 3-years warranty

**Reliability and performance specifications are averages and are based on normal office environmental conditions. Actual experience may vary.

LIB-D81 Series - AIT Desktop Autoloader
Model number	LIB-D81/A2T	LIB-D81/A3	LIB-D81/A3Ex	LIB-D81/A4	LIB-D81/A5
Drive Installed	AIT-2 Turbo Tape Drive	AIT-3 Tape Drive	AIT-3Ex Tape Drive	AIT-4 Tape Drive	AIT-5 Tape Drive
No of Drives Installed	1 Drive
Max.number of cartridges	8 cartridges
Capacity	1.66TB*/640GB	2.08TB*/800GB	3.12TB*/1.2TB	4.16TB*/1.6TB	8.32TB*/3.2TB
Sustained transfer rate	12 MB/s	12 MB/s	18 MB/s	24 MB/s	24 MB/s
Buffer Memory	32 MB	32 MB	96 MB	96 MB	96 MB
Interface	Ultra 160 SCSI LVD/SE
Interface configuration	68-pins high density connector
Cartridge access time	Average 13 seconds
MSBF	More than 1,000,000 times
MTTR	Within 30 minutes
Dimensions (excluding protrusions)	170 (W) x 224 (H) x 350 (D) mm
Weight	7 kg (with 1 drive)
Power requirements	AC100-240V -/+10%, 50/60 Hz
Power consumption	45 W
Operating Environment Temperature	5 degrees Celcius to 40 degrees Celcius
Operating Humidity	20 to 80% (non-condensing)
Indicators	7-segment LED x 2, LED x 2 (Error/Warning, Cleaning), 2-button keypad
Kit Model Information	AIT Autoloader unit, Terminator(For SCSI Model), Quick Install Guide and Power Cord
*Assumes 2.6:1 compression. Data compression performance varies according to the type of data.
Actual compression performance is generally lower if the data is already pre-compressed.