Article ID : S500022242 / Last Modified : 11/04/2018

What is the pairing procedure?

About the pairing procedure.

Applicable Products and Categories of This Article

Please refer to the steps below.
  1. Before turning on the Bluetooth headphones, turn on the Bluetooth devices and place within 1 m of the headphones.
  2. Enter pairing mode on the Bluetooth headphones.
    To enter pairing mode:
    Press and hold the /POWER button for more than 7 seconds* while the Bluetooth headphones are turned off.
    The indicator flashes blue and red alternatively and the Bluetooth headphones enters pairing mode.
  3. Enter pairing mode on the Bluetooth device.
    Refer to the manual provided with the Bluetooth device.
    -When the screen to select a connection target appears, select MDR-NWBT10.
    -When the screen to enter the passkey appears, enter 0000.
  4. Perform the Bluetooth connection on the Bluetooth device. 
    When pairing is established, depending on the Bluetooth device, Bluetooth connection may start automatically.


* After purchasing the Bluetooth headphones, when pairing for the first time, press and hold the /POWER button for about 2 seconds while the Bluetooth headphones are turned off.

Note:
If pairing is not established within about 5 minutes, pairing mode will be cancelled and the Bluetooth headphones will turn themselves off. In this case, start again from step 1.