Article ID : S500010527 / Last Modified : 11/04/2018

How to check the MAC(Ethernet) Address on the network board in my Windows 9* preinstalled machine?

Applicable Products and Categories of This Article

How to check the MAC(Ethernet) Address on the network board in my Windows 9* preinstalled machine?

Refer to the following procedure.

You can check the address with using Windows 9* utility [Winipcfg].

(note)
[TCP/IP] has to be installed beforehand.
To check if [TCP/IP] has already installed, refer to the following.

1, Right click on [Network Neighborhood], and then click [Properties].
2, If [TCP/IP] item is displayed under [The following network components are installed] in [Configuration] tab, [TCP/IP] is already installed.

The procedure for checking MAC address.

1, Click [Start]-[Run].
2, Type [winipcfg] in [Open] box and then click [OK].
3, You can check the address in [Adapter Address] under [Ethernet Adapter Information] in [IP Configuration] window.