Article ID : 00196064 / Last Modified : 11/04/2018

What is JEITA measuring standard?

What is JEITA measuring standard?

Applicable Products and Categories of This Article

PREPARATION

  1. Connect your VAIO computer to an AC power source.
  2. Recover your VAIO computer.
  3. Turn on your VAIO computer.
  4. Show the Start screen and select the Desktop tile or press <windows> key + D.
  5. Delete all icons except the garbage box on the desktop.
  6. Turn the Caps Lock, Num Lock and Scroll Lock indicator light off on your keyboard. If you are using the wireless keyboard, the turning off operation is unnecessary.

INVALIDATING THE OPTIMIZATION OF THE DRIVE

  1. Open File Explorer and select the Local Disk (C:) and righ-click on Properties.
  2. Select the [Tool] tab.
  3. Select the Optimization.
  4. Select the Changing setting.
  5. Uncheck Notify me if three consecutive scheduled runs are missed.
  6. Uncheck Run on a schedule (recommended).
  7. Select OK.
  8. Close all windows on the desktop.

VAIO CONTROL CENTER SETTINGS (Please skip t he step when the item does not exist)

  1. Start VAIO Control Center and set them as follows.
  2. Go to [Power and Battery] > [Power Plan] > Select [Power saver].
  3. Go to [Power and Battery] > [Cooling and Performance] > Select [Silence].
    **Please select [Silence] in both "STAMINA" and "SPEED" if your VAIO computer has the performance selector switch.
  4. Go to [Power and Battery] > [Power Saving] > [Set the display refresh rate when running on battery] > Select [40Hz].
  5. Go to [Mouse and Keyboard]> [Keyboard Backlight] > [Set the keyboard backlight action when running on battery] > Select [Do not turn on].
  6. Go to [Image Quality] > [Display Brightness] > [Set whether to sense the brightness and automatically adjust the display brightness accordingly] > Select [Off].
  7. Go to [Image Quality] > [Display Color Mode] > Select [Off].
  8. Go to [Image Quality] > [Mobile BRAVIA Engine 2] > Select [Off].
  9. Go to [Sound Quality] > [Sound Effects] > [Set the sound effect to use] > Select [None]. Please skip if you cannot select [None].
  10. Go to [Hardware] > [Rapid Wake] > Select [Off].
  11. Go to [Other] > [Send Usage Data] > Select [Off].
  12. Close all windows on the desktop.

CONTROL PANEL SETTINGS

  1. Go to [Control Panel] (If following item doesn't exist, it is not necessary to set it)
  2. Select [Large icon] or [Small icon] by View.
  3. Select [User accounts] - [Change User Account Control settings] .
    1. Move the slide bar to [Never notify].
    2. Click [OK].
    3. Click [Control Panel Home].
  4. Select [Action Center] - [Change Action Center Settings].
    1. Uncheck All enable item.
    2. Go to [Customer Experience Improvement Program settings].
    3. Check [No, I don't want to participate in the program].
    4. Click [Save Changes].
    5. Click [OK].
    6. Click [Control Panel Home].
  5. Select [System] - [Advanced system settings] - [Advanced]tab - Performance : [Settings].
    1. Click [Ajust for best performance].
    2. Click [OK].
    3. Select [Remote] tab.
      1. Uncheck [Allow Remote Assistance connections to this computer].
      2. Click [OK].
      3. Click [Windows Experoence Index] or [System rating is not available] - [Re-run the assessment] or [Rate this computer].
      4. Click [Control Panel Home].
  6. Select [Windows Firewall] - [Turn Windows Firewall on or off].
    1. Check [Turn off windows firewall (not recommended)] of Private network setting.
    2. Check [Turn off windows firewall (not recommended)] of Public network setting.
    3. Click [OK].
    4. Click [Control Panel Home].
  7. Select [Troubleshooting] - [Change settings].
    1. Select [Off] of Computer Maintenance.
    2. Uncheck [Allow troubleshooting to begin immediately when started].
    3. Click [OK].
    4. Click [Control Panel Home].
  8. Select [Power Options] - [Power saver].
  9. Go to [Change plan settings]:Power saver.
    1. [Dim the Display] - [On battery] : [Never].
    2. [Turn off the display] - [On battery] : [Never].
    3. [Adjust plan brightness] - [On battery] : [Never].
    4. Click [Save changes].
  10. Select [Power saver].
  11. Go to [Change plan settings] - [Change advanced power settings].
    1. Go to [Harddisk] - [Turn off hard disk after] - [On battery] : 1 Minute.
    2. Go to [Desktop background settings] - [Slide show] - [On battery] : [Paused].
    3. Go to [Sleep].
      1. [Sleep after] - [On battery] : [Never].
      2. [Hibernate after] - [On battery] : [Never].
      3. [Allow wake timers] - [On battery] : [Disable].
    4. Go to [USB settings] - [USB selective suspend setting] - [On battery] : [Enabled].
    5. Go to Intel(r) Graphics Settings - [Intel(R) Graphics Power Plan] - [On battery] : [Maximum Battery Life]
    6. Go to [Processor power management]
      1. Go to [Minimum processor state] - [On battery] : [0%]
      2. Go to [Maxmum processor state] - [On battery] : [0%]
    7. Go to [Display]
      1. [Dim display after] - [On battery] : [0 Minutes]
      2. [Turn off display after] - [On battery] : [Never]
    8. Go to [Multimedia settings] - [When playing video] - [On battery] : [Optimize power savings]
    9. Go to [Battery]
      1. [Critical battery action] - [On battery] : [Shut down]
      2. [Low battery level] - [On battery] : [0%] . Click [Yes] when alert message display
      3. [Critical battery level] - [On battery] : [100%]. Click [Yes] when alert message display
      4. [Low battery notification] - [On battery] : [Off]
      5. [Low battery action] - [On battery] : [Do nothing]
      6. [Reserve battery level] - [On battery] : [0%]
  12. Click [OK]
  13. Select [Language]
    1. Confirm only [English] on language list.
    2. Remove item when other language exist.
    3. Please add [English] from [Add a language] if there is not [English].
  14. Select [Notification Area Icons]
  15. Go to [Turn system icons on or off]
    1. Input indicator] : [off]
    2. Click [OK]
    3. Check [Always show all icons and notifications on the taskbar].
    4. Click [OK]
  16. Close all windows.

 WINDOWS MEDIA PLAYER SETTINGS

  1. Start Windows Media Player and carry out initial setting as follows.
  2. Select [Windows Media Player] - [Custom Settings] - [Next], all the following uncheck all item, and click [Next].
    1. Display media information from the Internet
    2. Update music files by retrieving media information from the Internet.
    3. Download usage rightsautomatically when I play or sync a file.
    4. Send unique Player ID to content providers.
    5. I want to help make Microsoft software and services even better by sending Player usage data to Microsoft.
      • Music
      • Pictures
      • Video
      • Playlists
    6. Check [Make Windows Media Player the default music and video player], and Click [Finish].
    7. The display of Windows Media Player is changed into skin mode by Ctrl+2.
  3. Close all windows.

SYSTEM CONFIGURATION SETTINGS

  1. Press the Win + R key.
    1. Enter the "msconfig" in the Run.
    2. Click the [OK].
    3. System configuration is started.
    4. Startup]tab -> Click the [Open Task Manager].
    5. Turn off all the items that are displayed. Select the items one at a time click on the bottom right [Disable] or Select [Disable] from the menu that appears by right-clicking.
    6. Close the [Task Manager] Window.
  2. Click the [Services]tab.
  3. Check the [Hide all Microsoft services] -> Click the [Disable all].
  4. Uncheck the [Hide all Microsoft services] -> Uncheck the following items.
    * Item that does not exist the setting is not required.
    • Background Inteligent Transfer Service
    • Bluetooth Support Service
    • Cryptographic Services
    • DHCP Client
    • Diagnostic Policy Service
    • Diagnostic Service Host
    • IP Helper
    • Network Connections
    • Network List Service
    • Network Location Awareness
    • Network Store Interface Service
    • Print Spooler
    • Security Accounts Manager
    • Security Center
    • Server
    • Shell Hardware Detection
    • Superfetch
    • TCP/IP NetBIOS Helper
    • Windows Defender Service
    • Windows Event Log
    • Windows Firewall
    • Windows Management Instrumentation
    • Windows Search
    • Windows Time
    • Windows Update
    • WLAN AutoConfig
    • Workstation
    • WWAN AutoConfig
  5. Click the [OK].
  6. Click the [Restart].
  7. After the reboot the screen display will start.
  8. Click the Desktop to display the desktop.

 VAIO GATE SETTINGS
*When VAIO Gate is not installed, this setting is unnecessary.

  1. Click to [VAIO Gate] (under left the desktop)
  2. Click to [Settings](ToolBox icon)
  3. [Load at startup] is switch to No.
  4. Click to [Quit]

 TASKBAR / DESKTOP SETTINGS
*When the item doesn't exist, this setting is unnecessary.

  1. Right click to [Taskber]
  2. Click to [Properties]
  3. Check [Auto-hide taskber]
  4. Click to [OK]
  5. Right click to [Desktop]
  6. Click to [View]
  7. Uncheck [Show desktop icons]
  8. Click to [OK]
  9. Right click to [Desktop]
  10. Click to [Graphics Properties...]
  11. Check [Advanced Mode] and Click to [OK]
  12. Click to [Power]
  13. [On battery] is select from Power Source.
  14. Uncheck [Display Power Saving Technology]
  15. When pop up message is displayed, Click to [OK]
  16. Click to [OK]
  17. Right click to [Desktop]
  18. Click to [Personalize]
  19. Click to [Desktop Background]
  20. Select to [Sony] by Picture location
  21. Select [VAIO Long Battery Life Wallpaper XXXX x YYYY]*
    *XXXX x YYYY is a resolution of the screen
  22. Click to [Save changes]
  23. Click to [Screen Saver]
  24. Select to [(None)] by Screen Saver
  25. Click to [OK]
  26. Right click to Program icons* (Internet Explore, File Explorer,etc...)
    *It is arranged in the left of the taskbar.
  27. Click to [Unpin this program from taskber]
  28. Above-mentioned is operated for all program icons.

AUDIO SETTINGS
*When the item doesn't exist, this setting is unnecessary.

  1. Right click to [Speaker icon] *right side of taskbar
  2. Click to [Sounds]-[Playback]tab
  3. Choice [Speaker/HP] and click to [Properties]
  4. Click to [Levels]tab
  5. The mute of all speakers@*click to Speaker icon
  6. Click to [OK]
  7. Click to [Recording]tab
  8. Choice [Microphone] and click to [Properties]
  9. Click to [Levels]tab
  10. The mute of all microphones@*click to Speaker icon
  11. Click to [OK]

WIRELESS SETTINGS

  1. Click to "Charm"-[Settings]-[wireless icon]
  2. Airplane mode is On

DEVICE MANAGER SETTINGS (Chipset is "Intel HM7x")

  1. Press "Win" key and "R" key. Input "devmgmt,msc", and click "OK". "Device Manager" starts.
  2. "View" > select "Devices by connection".
  3. Open all device written (*) in the following tables.
  4. Set [Disable] from the DEVICE of lower hierarchy to DEVICE of higher hierarchy.
    ACPI x64-based PC - Microsoft ACPI-Compliant System
    • PCI bus
      • High Definition Audio Controller
      • Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10
      • Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 2 - 1E12
      • Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 3 - 1E14
      • Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D
      • Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26
      • Intel(R) Management Engine Interface
      • Intel(R) USB 3.0 eXtensible Host Controller
    • Composite Bus Enumerator
    • Lightweight Sensors Root Enumerator
    • Microsoft System Management BIOS Driver
    • Microsoft Virtual Drive Enumerator
    • Qualcomm Atheros Bluetooth Bus
    • UMBus Root Bus Enumerator
  5. Right click "device of target", and select "Disable". "Disabling this device will cause it to stop functioning..." is displayed.
  6. Click "Yes". >"Downward arrow mark" is displayed.
  7. The setting of the device not displayed is unnecessary.
  8. If restart is demanded when "Disable" is set, click "No".
  9. In the model of wireless keyboard and the wireless mouse,"Disable" is not set to "HID Keyboard Device" and "HID-compliant mouse" and "Disable" is not set to "USB controller Device".
  10. Close window of "DeviceManager".

DEVICE MANAGER SETTINGS (The chipset is "AMD A68M FCH"

  1. Press "Win" key and "R" key. Input "devmgmt,msc", and click "OK".
  2. "Device Manager" starts.
  3. "View" > select "Devices by connection".
  4. Open all device written (*) in the following tables.
  5. Set [Disable] from the DEVICE of lower hierarchy to DEVICE of higher hierarchy.
    -ACPI x64-based PC
    • Microsoft ACPI-Compliant System
    • PCI Express Root Complex
      • AMD USB 3.0 eXtensible Host Controller
      • High Definition Audio Controller
      • High Definition Audio Controller
      • PCI Express standard Root Port
      • PCI Express standard Root Port
      • PCI Express standard Root Port
      • PCI standard ISA bridge
      • Standard Enhanced PCI to USB Host Controller
      • Standard OpenHCD USB Host Controller
    • Composite Bus Enumerator
    • Microsoft System Management BIOS Driver
    • Microsoft Virtual Drive Enumerator
    • Qualcomm Atheros Bluetooth Bus
    • UMBus Root Bus Enumerator
  6. Right click "device of target", and select "Disable".
  7. "Disabling this device will cause it to stop functioning..." is displayed.
  8. Click "Yes".
  9. "Downward arrow mark" is displayed.
  10. The setting of the device not displayed is unnecessary.
  11. If restart is demanded when "Disable" is set, click "No".
  12. In the model of wireless keyboard and the wireless mouse,
  13. "Disable" is not set to "HID Keyboard Device" and "HID-compliant mouse" and, "Disable" is not set to "USB controller Device".
  14. Close window of "DeviceManager".

SETTINGS FOR JEITA A and B

JEITA Measuring Method [a]:

  1. Open "Control Panel".
  2. Go to [Power Options] - [Power saver] - [Change plan settings] - [Change advanced power settings]
  3. Select [Display] - [Display brightness]
  4. Change to the following settings. On battery - 0%
  5. Click "OK".

JEITA Measuring Method [b]:

  1. Open "Control Panel".
  2. Go to [Power Options] - [Power saver] - [Change plan settings] - [Change advanced power settings]
  3. Select [Display] - [Display brightness]
  4. Change to the following settings.
  5. On battery - 0%
  6. Click "OK".

After setting and measuring [a] or [b], Set "Device Manager" again before doing the following measurement.
In that case, set "enable" to the device that wants to be set to "disable" once. and set to "disable".