Article ID : 00180418 / Last Modified : 24/07/2017

Windows 7 Compatibility Chart For MICROMV Camcorder

Applicable Products and Categories of This Article

The following tables show you the result of compatibility tests of each product with Windows 7.
About the applicable environments:

  • Windows 7 needs to be preinstalled at the factory.
  • Environments upgraded from other OS are not supported.
  • Operations are not guaranteed in all computers.

Note: 

  • The USB streaming function is not supported unless otherwise specified.
  • i.LINK connectivity is tested with Windows Movie Maker.

Legend:
O : Compatible
X : Not compatible
- : Not applicable

USB (Memory Stick)

i.LINK

Model

64-bit

32-bit

64-bit

32-bit

DCR-IP1/E O O O*8 O*8
DCR-IP210/E O O O*8 O*8
DCR-IP220/E O O O*8 O*8
DCR-IP45/E O O O*8 O*8
DCR-IP5/E - - O*8 O*8
DCR-IP55/E O O O*8 O*8
DCR-IP7/E/BT X X O*8 O*8

*8 The supplied software (MovieShaker Ver.3.1 for MICROMV) is not compatible with Windows 7.
When using Movie Maker,
- You cannot write back to a tape.
- 16:9 scenes will be 4:3 (vertically stretched).
- You cannot partly import movies from a tape (only entire movies can be imported).

 

The following table shows you the result of compatibility tests of each software with Windows 7. About the applicable environments:
  • Windows 7 needs to be preinstalled at the factory.
  • Environments upgraded from other OS are not supported.
  • Operations are not guaranteed in all computers.
Note:
  • Starter Edition of Windows 7 is not supported unless otherwise specified.
  • With 64-bit editions, the software works in the 32-bit compatibility mode.

Software

Compatibility 

64-bit

32-bit 

MovieShaker Ver.3.1 for MICROMV No

Last Updated 14th October 2009