How to set up and use the Wi-Fi Direct feature of the Android TV with Wi-Fi Direct capable device.
Please refer following settings:
IMPORTANT: This is a model-specific solution, view the Applicable Products and Categories for this article to verify that these specifications apply to your model.
- Enable the Built-in Wi-Fi setting on your TV.
- Using the TV remote control, press the HOME button.
- Select Settings.
- Select Network in the NETWORK & ACCESSORIES category.
- Select Advanced settings.
- Select Built-in Wi-Fi, and change to On.
- Turn on the Wi-Fi Direct setting of the TV.
- Using the TV remote control, press the HOME button.
- Select Settings.
- Select Network in the NETWORK & ACCESSORIES category.
- Select Wi-Fi Direct, and change to On.
- Display the TV's WPA key.
- Using the TV remote control, press the HOME button.
- Select Settings.
- Select Network in the NETWORK & ACCESSORIES category.
- Select Wi-Fi Direct.
- Select Wi-Fi Direct Settings.
- Select Show Network (SSID)/Password.
- The SSID and the WPA key will be displayed on the TV screen.
NOTE: Additional information is available if you need to change the device name or SSID of the TV .
- On the Wi-Fi setting of the Wi-Fi Direct device, select the SSID of the TV and enter the WPA Key displayed on the TV screen as the password.
- If the connection is successful, the message Wi-Fi device is connected, is displayed on the TV screen.
NOTE:- For more details refer to the manual supplied with your smartphone or tablet.
- For instructions on using the Throw function to transmit images or music from an Xperia, see the FAQ below.
How to transmit images and music from an Xperia to the BRAVIA TV via Throw.