Article ID : 00092645 / Last Modified : 11/04/2018

PlayMemories Camera Apps Support Page: Multi Frame NR

PlayMemories Camera Apps Support Page: Multi Frame NR

Applicable Products and Categories of This Article


» Account Information
» General FAQs
» Bracket Pro
» Multi Frame NR
» Picture Effect+
» Photo Retouch
» Smart Remote Control
» Time-lapse


 

  1. When I switch the camera to the playback mode while Multi Frame NR is active, Program Shift is cancelled.
    When the image is recorded with the flash ready (such as the built-in flash is up or the external flash is attached and turned on), Program Shift is cancelled after switching to the playback mode. If the image is recorded with the flash not ready (such as the built-in flash is lowered or the external flash is off), Program Shift remains after switching to the playback mode.

    For the camera without mode dial, if the Multi Frame NR started in the modes except P/A/S/M, Program Shift is cancelled after switching to the playback mode. If you do not want to cancel Program Shift in this case, select P mode from MENU.

  2. ISO value is not displayed when played back.
    ISO value is not displayed If you record images with Multi Frame NR and play them back without Multi Frame NR activated. To display the ISO value, start the application first.