Article ID : 00064002 / Last Modified : 11/04/2018

How to activate AAC playback via Bluetooth connection with an aptX codec device?

Applicable Products and Categories of This Article

Activating or turn on AAC playback via Bluetooth connection with an aptX codec device.

If you use AAC codec when making Bluetooth connection with the system, set the AAC setting of the system to ON, by the following procedure.

  1. Make sure the system is turned off, then connect the supplied AC adaptor.
    Connect to AC adaptor
  2. Set the BLUETOOTH STANDBY switch to ON.
    BLUETOOTH STANDBY
  3. Hold down the VOLUME - button, then press and hold the Image button.
    Step 3

    After the SOUND indicator lights up in green and then turns off, the setting is completed.

 

If there is noise, or sound is interrupted
Set the AAC setting of the system to off, by the procedure above. After the SOUND indicator lights up in amber and then turns off, the AAC setting is set to off.