Article ID : 00056402 / Last Modified : 11/04/2018

How to connect to my wireless home network using Wi-Fi® Protected Setup (WPS).

Applicable Products and Categories of This Article

IMPORTANT: This procedure only works if you use a WPS-compatible router. If your router is not compatible with WPS and you do not know your password, please refer to instruction manual of your router or contact your internet provider.

If you use Wi-Fi Protected Setup (WPS) compatible router, you can connect to the network wirelessly without the password by doing the following:

  1. On the remote control, press the Imagebutton.
  2. Select Settings.
  3. Select Network.
  4. Select Wi-Fi.
  5. Select the name of your network.

    NOTE: WPS available displays under the name of your network.

  6. Select the Network Setup field.
  7. Select WPS push button.
  8. Select Connect.
  9. On your router, press and hold the WPS button until the LEDs begin flashing.

    IMPORTANT: This step must be performed within two minutes of completing step 8, otherwise you will need to repeat steps 5-8.

  10. Release the WPS button.